| 7 订单数量
顺丰速运 （https://www.sf-express.com/）
圆通快递 （https://www.yto.net.cn/）
中通快递 （https://www.zto.com/）
顺丰速运 （https://www.sf-express.com/）港澳台
无需物流 (线下配送)
规格书
The TLV61224 device provides a power-supply solution for products powered by either a single-cell or 2-cell alkaline or NiMH, or 1-cell Li-primary battery. Possible output currents depend on the input-to-output voltage ratio. The boost converter is based on a hysteretic controller topology using synchronous rectification to obtain maximum efficiency at minimal quiescent currents. The output voltage of this device is set internally to a fixed output voltage of 3 V. The converter can be switched off by a featured enable pin. While being switched off, battery drain is minimized. The device is offered in a 6-pin SC-70 package (DCK) measuring 2 mm × 2 mm to enable small circuit layout size.
德克萨斯仪器tlv61224dckt
的tlv61224设备提供由一个单细胞或细胞碱性或镍氢电池供电产品的电源解决方案，或1节锂原电池。可能的输出电流取决于输入输出电压比。Boost变换器基于滞环控制器拓扑，采用同步整流，以最小的静态电流获得最大效率。该设备的输出电压是内部设置到一个固定的输出电压为3 V。转换器可以关闭由一个功能使能引脚。关闭电源时，电池漏极降至最低。该装置是在6引脚SC-70封装提供（DCK）测量2毫米2毫米×使小规模电路布局。
******
