深圳超互联思维电子有限公司 | 会员登录 | 注册账号
TI德州仪器专业分销商 我们只做全新原装正品
TXS0101DBVRG4  Konverter IC VLEVEL TRANSL BIDIR SOT236
  |  0 订单数量
单价
1.10  / PCS
发货方式
 顺丰速运 (https://www.sf-express.com/)
 圆通快递 (https://www.yto.net.cn/)
 中通快递 (https://www.zto.com/)
 顺丰速运 (https://www.sf-express.com/)港澳台
 无需物流 (线下配送)
数量
 PCS
金额
合计 ¥1.10
 
选择我们!为您的需求保驾护航!!!^_^
逻辑芯片
产品详情
型号TXS0101DBVRG4
封装SOT-23-6
品牌Texas Instruments
描述Konverter IC V-LEVEL TRANSL BI-DIR SOT23-6
 规格书点击查看

Texas Instruments TXS0101DBVR

This one-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. The B port is designed to track VCCB. VCCA must be less than or equal to VCCB. VCCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for low voltage bidirectional translation between any of the 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

德克萨斯仪器txs0101dbvr
这一位非逆变使用两个独立的可配置电源轨。的一个端口跟踪VCCA能设计。VCCA接受任何电源电压从1.65 V到3.6 V的端口B用于追踪VCCB。VCCA必须小于或等于VCCB。VCCB接受从2.3 V至5.5 V,这允许低电压双向翻译任何的1.8 V、2.5 V、3.3 V之间的任何电压,5 V电压节点。
当输出使能(OE)的输入是低的,所有的输出被放置在高阻抗状态。
为了确保在上电或断电时的高阻抗状态,OE应该通过一个下拉电阻连接到GND;电阻器的最小值取决于驱动程序的电流启动能力。
¥ 1.10 (RMB)/PCS
¥ 1.10 (RMB)/PCS
 
 
 

www.cn.int-thinking.net©2006-2017深圳超互联思维电子有限公司(版权所有)