深圳超互联思维电子有限公司 | 会员登录 | 注册账号
TI德州仪器专业分销商 我们只做全新原装正品
TPS2062DGNRG4  控制器 IC CURRLIMIT PWRDIST SW 8MSOP
  |  0 订单数量
发货方式
 顺丰速运 (https://www.sf-express.com/)
 圆通快递 (https://www.yto.net.cn/)
 中通快递 (https://www.zto.com/)
 顺丰速运 (https://www.sf-express.com/)港澳台
 无需物流 (线下配送)
数量
 PCS
金额
合计 ¥0.00
 
选择我们!为您的需求保驾护航!!!^_^
逻辑芯片
产品详情
型号TPS2062DGNRG4
封装8-MSOP-PowerPad
品牌Texas Instruments
年份18+
描述控制器 IC CURR-LIMIT PWR-DIST SW 8-MSOP
 规格书点击查看

Texas Instruments TPS2062DGN

The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70-m N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V.

When the output load exceeds the current-limit threshold or a short is present, the device limits the output current to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low. When continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures that the switch remains off until valid input voltage is present. This power-distribution switch is designed to set current limit at 1.5 A typically.

德克萨斯仪器tps2062dgn
的tps206x配电开关是专为应用高电容负载和短路是可能遇到的问题。该装置采用70m的N沟道MOSFET功率开关电源分布系统需要多个电源开关在一个包。每个开关由一个逻辑使能输入控制。栅极驱动由内部电荷泵提供,用于控制电源开关上升时间和下降时间,以减少开关期间的电流浪涌。电荷泵不需要外部元件,允许从2.7 V低供应。
当输出负载超过电流限制阈值或短期存在,通过进入恒定电流模式开关器件的电流输出限制到安全水平,拉过流(ocx)逻辑输出低。当持续的重载和短路增加开关中的功率损耗,导致结温上升时,热保护电路切断开关以防止损坏。一旦设备充分冷却,从热关机中恢复是自动的。内部电路确保开关保持关闭,直到有效的输入电压存在。这种配电开关的设计设置电流限制为1.5,典型的。
 
 
 

www.cn.int-thinking.net©2006-2017深圳超互联思维电子有限公司(版权所有)